A Mirror-Back Display Cabinet in a Balcatta Corner
A corner is the hardest place in a room to put anything. It is the darkest spot, nothing fits it properly, and whatever goes there usually ends up looking like it was pushed out of the way. This Balcatta client put a mirror-back cabinet in one instead — delivered and assembled in February 2026.
Why the mirror matters more in a corner
In the middle of a wall, a mirror back is about doubling the collection — you see the front and back of every piece at once. In a corner it does something else as well: it reflects the open room rather than the wall, so the cabinet reads as an opening instead of a solid block. The corner stops feeling closed off. It is the one position where a mirror back changes the room and not just the display.
Swing doors, opening into the room
Swing doors were the right call here because the cabinet faces out of the corner rather than being boxed in by it — there is open floor in front, so both doors clear easily. The advantage over sliders is access: with a swing door the whole shelf is open at once, so a tall piece can be lifted straight out instead of being worked around a half-width opening. On a mirror-back cabinet there is a second benefit — no overlapping door panels sitting in front of the glass, so the reflection reads clean across the full width.
Three downlights and four lit uprights
Corners get no natural light, so the cabinet has to bring its own. Three LED downlights sit in the top panel and four COB strips run the full height of every internal corner, each a continuous 5mm line rather than a row of diodes — so there are no dots showing in the glass or, worse, doubled in the mirror. The mirror then bounces all of it back through the shelves, which is why a lit mirror cabinet reads noticeably brighter than a lit glass one. Cool white as standard, dimmable from a phone over Bluetooth, no Wi-Fi needed.
Five shelves, set where you need them
Five adjustable 8mm tempered glass shelves, 25kg each, give six display levels across the full 2m height. All of them move, so the bays can be set tight for small pieces and opened up for taller ones — and reset later as the collection changes. The glass shelves let light through to the level below rather than casting a shadow over it.
Locked, sealed, levelled
A numeric combination lock means no key to lose in a family home and no hunting for one when someone wants a look. Fully enclosed glass keeps the dust off, which on a mirror-back cabinet matters twice over — dust shows on the mirror as readily as on the pieces. Adjustable levelling feet set the cabinet plumb on carpet, which is what keeps the swing doors hanging square and closing flush.
Delivered flat, built in the corner
A 2m cabinet with a full-height mirror panel cannot be carried into a corner assembled — there is no room to swing it into place, and the mirror is the last thing you want to manoeuvre. It arrived flat-packed in enclosed plywood crates and was built in position: frame squared to both walls, mirror and glass fitted in place, feet levelled to the carpet, wired and lit before we left.
A mirror back reflects the room rather than the wall, so the corner reads as an opening instead of a dead spot. Black or silver. We supply, deliver and assemble across Perth and Australia-wide.
Get in touch Back to projects