🎄 Christmas delivery to the eastern states: order & pay freight by 12pm Fri 11 December. Freight details →
Gloved hands lifting an adjustable toughened glass shelf inside a black-framed Hobbs Displays glass cabinet, with LED-lit shelf-pin supports visible
Hobbs Displays Β· Care & Maintenance

How to Adjust & Re-space Your Glass Shelves Safely

A Practical Guide Β· No. 33

A glass display cabinet grows with your collection.

As your pieces change β€” a taller trophy, a new range, a display you want to rework β€” the shelves move with them. Done properly, re-spacing takes only a few minutes. Here's how to do it safely, without risk to the glass or your collection.

Before you start

Clear the shelf you're moving completely β€” never adjust a shelf with items still on it. Clean, dry hands (or soft gloves) give you a better grip and keep fingerprints off the glass. Work calmly and never force anything: toughened glass is strong, but it should always sit naturally on its supports, not be pushed or wedged.

Quick checklist
  • Β·Empty the shelf completely.
  • Β·Clean, dry hands or soft gloves.
  • Β·Spare set of shelf pins handy.
  • Β·Take your time.

Understanding your shelf supports

Inside each corner of the cabinet you'll see a vertical strip of evenly spaced holes. Small metal shelf pins push into these holes, and the glass shelf rests on top of four pins β€” one in each corner. Moving a shelf up or down is simply a matter of moving all four pins to the same height. The golden rule: all four pins must sit in matching holes so the shelf is fully level and evenly supported.

Watch: how the shelves adjust

Here's the movement in action β€” the shelf lifts clear, the pins relocate, and the glass settles back onto its new position.

The three steps

01
Remove the glass shelfWith both hands, lift the shelf straight up a few millimetres until it clears the pins, then bring it gently towards you and set it down somewhere safe and flat. Always lift β€” never slide. Sliding drags the glass edge across the pins and can scratch or chip it. Two hands, one on each side, keeps it balanced.
02
Move the pinsPull each pin out and push it firmly into the new hole at the height you want. Do all four. The easiest way to stay level is to count the holes from the top or bottom and use the same number in every corner. Give each pin a gentle wiggle to confirm it's seated properly and won't slip.
03
Refit the shelf and check it's levelLower the glass back down so it rests evenly on all four pins. Press lightly on each corner β€” there should be no rocking or movement. If a corner dips or the shelf wobbles, one pin is in the wrong hole; lift the glass and correct it before loading any items back on. A shelf that sits flat and solid is a shelf that's safe.

Safety do's and don'ts

Do
  • βœ“Empty the shelf before moving it.
  • βœ“Lift straight up β€” never slide the glass across the pins.
  • βœ“Make sure all four pins are at the same height.
Don't
  • βœ•Overload a shelf or let items hang over the edge.
  • βœ•Force a shelf into a space that's too tight β€” it should rest, not wedge.

Spacing tips for a better display

Leave a little headroom above each item so pieces don't look cramped β€” a few centimetres of air makes a collection feel premium. Group items of a similar height on the same shelf for a clean, even line, and save the top shelf at eye level for your hero pieces, where the lighting hits best. Because the shelves are fully adjustable, you can keep tuning the spacing until the whole cabinet looks just right.

Want fully adjustable toughened glass shelves?

Every Hobbs cabinet comes with height-adjustable shelves as standard β€” built to your exact size.

Shopping Cart