🎄 Christmas delivery to the eastern states: order & pay freight by 12pm Fri 11 December. Freight details →
Hobbs Displays · Project

A Mirror-Back Display Cabinet for a Bullsbrook Garage

Twice the light, and the back of every model
Bullsbrook WA · LuxCore™ Mirror, 1m × 0.5m × 2m, Black · Delivered & assembled March 2026
Black-framed LuxCore mirror glass display cabinet with five LED-lit glass shelves, corner COB strips and lockable sliding doors, installed in a home garage in Bullsbrook WA

Mirror back, four corner strips — the light comes back at you twice.

The garage is where most collections in Perth actually live. It is also the hardest room to display anything in — hard light overhead, dust off the driveway, and a wall that is usually doing three other jobs already. This Bullsbrook client put a LuxCore™ Mirror cabinet against one, delivered and assembled in March 2026.

What the mirror back actually does

It shows you the back of the model. On a shelf against a wall, half of every piece is permanently hidden — the rear wing, the tail, the reverse of a helmet. A 6mm tempered mirror back gives that side back, so a single row reads like two. It also doubles the lighting: every corner strip is reflected, so the cabinet throws roughly twice the light with the same fittings. In a room where the collection is competing with a fluorescent batten, that is the difference between visible and lit.

Tempered mirror, not bathroom mirror

The back panel is 6mm tempered mirror glass rather than the standard mirror most cabinets use. It is the commercial specification — stiffer, safer if it is ever struck, and it stays flat over two metres instead of bowing and distorting the reflection. In a garage, where a cabinet gets knocked more often than it does in a lounge room, that is worth having.

A metre wide, floor to near-ceiling

At 1000mm wide and 500mm deep the cabinet takes almost no wall — it fits between a doorway and a window, which is exactly where this one went. Five adjustable 8mm shelves give six levels over the full 2m height, each rated to 25kg, so die-cast and boxed pieces can sit anywhere without the spacing being fixed around them.

Lit from the top and all four corners

Three downlights sit in the top panel and four COB strips run the full height of the internal corners. The COB strips are a continuous line rather than a row of diodes, so there are no dots reflected in the mirror — which matters far more in a mirror-back cabinet, where every flaw in the lighting appears twice. Cool white as standard, dimmable from a phone over Bluetooth.

Sliding doors, and no dust

Sliding doors were the right call in a garage: they never swing out into the walkway or catch on anything parked nearby, and one hand opens them. They lock with a key, so the collection is secured whenever the garage door is up. Fully enclosed glass keeps driveway dust off the collection, which in a garage is not a small thing — it is the main reason garage displays start to look tired.

Delivered flat, built in place

The cabinet arrived flat-packed in a fully enclosed wooden crate and was assembled where it stands — mirror set, glazed, levelling feet trued to the concrete, wired and lit before we left.

Project Details
Product
Quantity
1 Unit
Size
1000 (L) × 500 (D) × 2000 (H) mm
Frame
Square-profile aluminium alloy, black
Back panel
6mm tempered mirror glass
Glass
Tempered safety glass · 8mm shelves
Shelves
5 adjustable glass shelves, 25kg each
Lighting
3 top LED downlights + 4 vertical corner COB strips
Control
Bluetooth app control, cool white standard
Doors
Sliding glass doors
Lock
Key lock
Supply
Flat-packed in a fully enclosed crate, assembled on site
Location
Bullsbrook, WA
Assembled
March 2026
Only ever see the front of your collection?

A tempered mirror back gives you the other side of every piece and doubles the light doing it. Black or silver, sliding or swing doors. We supply, deliver and assemble across Perth and Australia-wide.

Get in touch Back to projects
Shopping Cart