A LuxGuard™ Pro Cabinet, Lit from Every Corner — Seville Grove
Most people choose a display cabinet on size and finish, then discover that lighting is what actually decides how it looks. A cabinet with one strip along the top is lit at the top and dim everywhere else. This LuxGuard™ Pro went into a Seville Grove living room in February 2026, and it is a useful one to look at empty, because with nothing inside you can see exactly where the light comes from.
Three above, four down the corners
Three LED downlights sit in the top panel and four COB strips run the full height of every internal corner. That combination is deliberate: the downlights throw light straight down onto the upper shelves, and the corner strips fill the rest of the height from four sides at once. On a 2m cabinet, top-only lighting leaves the bottom two shelves in shade. Here the base is as bright as the top.
Straight on — the light is a line, not a row of dots.
Why COB and not ordinary LED
Look at the corner strips in the photo above: a continuous 5mm line of light, not a row of individual diodes. That is the difference between COB and standard LED tape, and in a glass cabinet it matters twice over — once because the light itself is even rather than scalloped, and again because glass reflects. A dotted strip shows up as dots repeated in every pane and in anything shiny on the shelves. A continuous line just reads as light.
The white back panel does half the work
At 600mm deep this is the deepest cabinet in the LuxGuard range, and depth is the enemy of even light — the back of a shelf is further from every light source than the front. The white rear panel is what solves it: light hitting the back reflects forward through the display instead of being absorbed. It also means items are seen against a clean, bright ground rather than a shadowed one.
Controlled from a phone
Brightness, dimming, patterns and sound-reactive modes all run over Bluetooth — no Wi-Fi, no hub, no wall switch to install. Cool white is standard, with warm white available at no extra cost, and an RGB upgrade if you want the colour to change. In a living room that matters more than it might sound: the cabinet can be full brightness when you are showing it off and dimmed right down when the television is on.
Sliding, locked, and levelled
Sliding glass doors open in place, so the cabinet sits against the wall in a working living room without needing clear floor in front of it. The lock is a keyless combination — nothing to lose. Shelves are 8mm tempered glass rated to 30kg each, adjustable, so the spacing can be set once the collection goes in and reset later when it changes.
Delivered flat, built in the room
The cabinet arrived flat-packed in two fully enclosed wooden crates and was assembled in position — squared to the wall, levelling feet set to the floor, glazed, wired and lit before we left.
Ask how many light sources and whether the strips are COB. Ours run three downlights plus four full-height corner strips as standard, cool or warm white, with an RGB upgrade available. We supply, deliver and assemble across Perth and Australia-wide.
Get in touch Back to projects