Mirror Display Cabinets for a Myaree Performance Parts Showroom
Performance parts are bought with the eyes first. A header, a billet intake or a set of forged pistons sells itself once someone can see the finish up close — and sits unnoticed in a box behind a counter. This Myaree workshop services cars and sells the parts that go in them, and wanted the front room to sell as hard as the workshop works. Seven black mirror-back units went in, delivered and assembled in January 2026.
Two widths, one continuous wall
Four 1m LuxCore™ Mirror cabinets and two 1.2m LuxGuard™ Mirror cabinets line the walls — 6.4m of full-height display in two runs, with thirty adjustable glass shelves between them. Every shelf is 8mm tempered glass rated to 25kg, which matters here: exhaust manifolds, intakes and boxed engine parts are far heavier than the ornaments most display cabinets are built around.
Why mirror backs suit car parts
Chrome, polished stainless and machined alloy all look best when you can see them from more than one side. The 6mm tempered mirror back shows the rear of every part — the welds on a manifold, the back of an intake plenum, the far side of a boxed kit — so a customer standing in front of the cabinet sees the whole piece. It also bounces the cabinet lighting back through the shelves, so the room reads brighter and twice as deep as it is.
Lighting that makes metal read
Every cabinet runs COB LED strips down all four internal corners, and the two LuxGuard™ Mirror units add three downlights in the top panel. COB gives a continuous line of light rather than a row of dots, so there are no bright spots reflected in polished parts. Against black batten walls and a black marble floor, the lit glass is the brightest thing in the room — which is exactly where the eye should go. Brightness and modes run from a phone over Bluetooth.
A counter in the middle of the floor
A 1.8m LuxLine™ Majestic counter sits as an island between the two runs, fitted with a mirror back in place of the standard glass. At 1.1m high it puts the smaller, higher-value stock — blow-off valves, gauges, fittings, coilover parts — at the height staff actually serve from. Three adjustable shelves, corner COB strips and a strip under the top glass light it from inside, and the sliding doors open without swinging into the walkway.
Locked with keys, not codes
All seven units lock with keys. In a shop that is the right call: a combination lock means a code entered in front of customers, while keys stay with staff. The swing doors on the tall cabinets and the sliding doors on the counter all lock, so stock can stay on display after hours.
Delivered flat, built in place
Every unit arrived flat-packed in enclosed wooden crates and was assembled on site — squared up in each run, levelling feet set on the marble tile, glazed, wired and lit before we left.
Mirror-back cabinets show every side of what you sell, lit and locked. Mix widths along a wall and add a counter in the middle. We supply, deliver and assemble across Perth and Australia-wide.
Get in touch Back to projects
