Slim Tower Glass Display Cabinet
A collection of African ceremonial masks needs height rather than width — each piece wants its own space and its own light, and nothing should crowd the one above it. This tower cabinet went into a Crawley home in May 2026, in the corner beside the entry, on half a metre of floor.
Two metres of display, half a metre of floor
At 500 × 500mm square and 2m tall, the cabinet takes almost no room but gives four display levels — three adjustable glass shelves plus the base. One mask per level, mounted on its own stand, with clear air above and below it. In a hallway or entry corner that a wider cabinet would block, this one simply stands there.
Lit down all four corners
Full-height LED strips run every vertical corner, with downlights in the top panel. Carved wood and fibre are all texture, and texture disappears under a single light from above — light coming in from four sides at once picks up the grain, the pigment and the depth of every cut. Warm white rather than cool, so the timber tones stay true.
Glass on every side, locked
Tempered glass on all four sides — front, both sides and the back — means the collection reads from anywhere in the room, not just head-on, and light passes straight through rather than stopping at a solid panel. The single glass door locks, and the whole cabinet arrived flat-packed in a plywood crate and was assembled on site — levelled, wired and lit before we left.
A 0.5m square tower gives two metres of lit, lockable display in a corner most furniture can’t use. We supply, deliver and assemble across Perth and Australia-wide.
Get in touch Back to projects