Why choose this power supply?
IP67 rated
Dust-tight and water-resistant. Suits outdoor use, under-cabinet installs, wash-down areas and damp locations.
SAA approved
Certified to applicable AS/NZS electrical safety standards.
Flicker-free 12V
Regulated constant-voltage output for smooth lighting, including in camera-visible displays.
120W of headroom
120W total (10A at 12V DC) for medium to large LED systems.
Key features
SELV design with short-circuit, overload and over-temperature protection.
Add up the wattage of all connected 12V devices. For best lifespan, run at 80 to 90% capacity (96 to 108W).
Wire all 12V devices in parallel and observe correct polarity (+ and -).
For dimming, fit a compatible 12V PWM dimmer or controller on the low-voltage side.
Mains connection must be carried out in line with local electrical regulations.
Specifications
| Item | Details |
|---|---|
| Input voltage | 200 to 240V AC |
| Output voltage | 12V DC (regulated constant voltage) |
| Maximum output | 120W / 10A |
| Recommended maximum load | 96 to 108W |
| Ingress rating | IP67 |
| Safety | SELV with overload, short-circuit and thermal protection |
| Compliance | SAA approved to relevant AS/NZS standards |
| Included | 1 × 12V DC IP67 LED driver (120W), basic installation information |
Ideal for
- LED strip lighting
- Glass display cabinet lighting
- LED downlights and 12V DC spot modules
- Retail displays, signage and showcases
- Architectural low-voltage lighting
Supplied from Perth
Supplied by Hobbs Displays in Perth — the same parts we use in our own cabinets, with more than ten years supplying workshops, shops and warehouses across Australia behind them.








